This product is for testing purposes only!
A Certificate of Occupancy is issued pursuant to a building permit for new construction, additions, and changes of occupancy after all the necessary construction has been approved by the inspector. It is evidence that the Department of Building and Safety has determined that the construction was done according to the requirements of the code for the given occupancy to be housed in the building. Not all construction work receives a C of O, only when square footage is being added. For new construction, the C of O is automatically issued following the final inspection. For older construction, a C of O may not be on file and would require special attention (http://www.ladbs.org/faq).
To obtain a permit, the applicant shall file an application on forms furnished by the Los Angeles Department of Building and Safety. Once the Department of Building and Safety determines that the information on the application meets its requirements, the Department issues a permit.
A permit is required to build, remodel, repair, demolish, remove or move any building or structure. A separate permit is required for each separate building or structure. Examples of work that requires a permit: roofing, stucco, window, and door change-out, drywall replacement, installation of security bars, fire damage repairs, chimney repairs, and anchor bolting/bracing foundation (Los Angeles Municipal Code Section 91.106).
A plumbing permit is required to add, alter, construct, install, move, relocate, remove, reconstruct, repair, or replace any plumbing, rainwater piping, subsurface drainage piping, swimming pool piping, reclaimed, water piping, or greywater piping. A permit shall be required where the Department has determined that the gas piping shall be retested for the following:
An electrical permit is required for electrical wiring. No person shall install, alter, reconstruct or repair any electrical wiring unless a permit has been obtained from the Department except as provided by your local city code (Los Angeles Municipal Code Section 93.0201).
An HVAC permit is required to install, alter, repair, relocate, replace or add any heating, ventilating, or air-conditioning equipment. A permit shall be obtained for all heating, ventilating, air-conditioning or refrigeration equipment or other miscellaneous heat-producing appliances moved with, or installed in, a relocated building in the City (Los Angeles Municipal Code Section 95.0112).
Sewer Permits are issued to private individuals or contractors to connect to an existing house connection sewer or to facilitate the construction of a house connection sewer.
There are two types of sewer connection:
A grading permit is required to import or export any earth material to or from any grading site. A grading permit is also required to perform any grading within areas within areas designated “hillside” (Los Angeles Municipal Code Section 91.106).
A plot plan is a scale drawing of your property that shows the size and configuration of your property and the size and location of manmade features (building, driveways, and sidewalks) on the property. Plot plans show what currently exists on your property as well as physical changes you wish to make.
A report that displays the zoning information for most parcels within the City of Los Angeles that can be identified by address or property tax bill number.
Any violations/order to comply on a property. Violations within the last 12 months will not be on file.
Reports approved by the Grading Department
*Electrical, Plumbing, Mechanical Permits are only available from 1985-1990 and 1997 to present